SS804 Silicone Joint Sealant for doors and windows and exterior
wall sealing ISO 11600 Class 20
COMPOSITION
One-part, neutral-curing
RTV silicone sealant
APPLICATIONS
Sealing joints of doors and windows;
Sealing joints of the exterior wall;
Many other uses.
TYPICAL PROPERTIES
| Property | Result | Test method |
| Uncured-As Tested at 23°C (73°F) and 50% RH |
| Working time(23°C/73°F, 50% RH) | 10-20minutes | |
| Tack-free time(23°C/73°F, 50% RH) | 30-60 minutes | ASTM C679 |
| Curing time(23°C/73°F, 50% RH) | 7-14 days | |
| Flow, Sag or Slump | ＜0.1mm | ASTM C639 |
| VOC Content | ＜39g/L | |
| As Cured-After 21 days at 23°C (73°F) and 50% RH |
| Durometer Hardness, Shore A | 20-60 | ASTM C661 |
| Joint Movement Capability | ±20% | ASTM C719 |
| Tensile Adhesion Strength |
| AT 25% extension | 0.279MPa | ASTM C1135 |
| AT 50% extension | 0.473MPa | ASTM C1135 |
| Specifications:Typical property data values should not be used as specifications.
Assistance with specifications are available by contacting Guangzhou Baiyun Technology CO.,LTD. |
FEATURES
Good extrusion and thixotropy between 4℃~+40℃.
Easy to use
Neutral curing, non-corrosive curing system;
No unpleasant odor during curing;
Excellent resistance to weather, UV, ozone, water;
Good adhesion to most common building material;
Good compatibility with other neutral silicone sealants.
DESCRIPTION
BAIYUN SS804 Silicone Joint Sealant is a one-component, neutral
curing, general-purpose construction silicone sealant with good
adhesion to glass, aluminum, cement, concrete, etc., specially
designed for sealing in all type door, window, and wall joints.
SPECIFICATIONS
BAIYUN SS804 Silicone Joint Sealant meets or exceeds the
requirements of the following standards for one-part sealants.
Specifications
· ISO11600-F-20HM
· ASTM C920; TypeS, Grade NS, Class 20, Use NT, A, G, M, O
COLORS
Available in black, gray, and white (standard colors)
Available in a wide variety of colors (customized)
PACKAGING
BAIYUN SS804 Silicone Joint Sealant is available in 10.1 fl. oz.
(300 ml) plastic caulking cartridges and 16.9 fl. oz. (500 ml) foil
sausage packs
USABLE LIFE AND STORAGE
When stored at or below 27ºC (80ºF) in the original unopened
containers, BAIYUN SS804 Silicone Joint Sealant has a usable life
of 12 months from the date of manufacture.
LIMITATIONS
BAIYUN SS804 Silicone Joint Sealant should not be used, applied or
recommended:
In structural glazing applications or where the sealant is intended
as an adhesive.
In areas where abrasion and physical abuse are encountered.
In totally confined spaces as the sealant requires atmospheric
moisture for cure.
On frost-laden or damp surfaces
To building materials that bleed oils, plasticizers or solvents –
materials such as impregnated wood, oil-based caulks, green or
partially vulcanized rubber gaskets or tapes.
In below-grade applications
On substrates made of PP, PE, PC, PMMA and PTFE.
Where movement capability greater than ±12.5% is required.
Where painting of the sealant is required, as the paint film may
crack and peel
For structural adhesion on bare metals or surfaces subject to
corrosion (i.e., mill aluminum, bare steel, etc.)
To surfaces in contact with food
For use underwater or in other applications where the product will
be in continuous contact with water.
New concrete must be allowed to cure and dry for at least 7 days of
good drying weather.
HANDLING AND SAFETY
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN
THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND MATERIAL SAFETY
DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE MATERIAL SAFETY DATA SHEET IS AVAILABLE
FROM BAIYUN SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING BAIYUN
CUSTOMER SERVICE.
HOW TO USE
Complete design and installation guidelines are contained in the
BAIYUN Technical Manual when using this product
HEALTH AND ENVIRONMENT INFORMATION
For information and advice regarding transportation, handling,
storage and disposal of chemical products, users should refer to
the actual Material Safety Data Sheets containing physical,
ecological toxicological and other safety-related data.
LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is
believed to be accurate. However, because conditions and methods of
using our products are beyond our control, this information should
not be used in substitution for customer’s tests to
ensure that the products of Guangzhou Baiyun Technology CO.,LTD. are safe, effective, and fully satisfactory for the intended end
use. Suggestions of use shall not be taken as inducements to
infringe any patent.
The warranty of Guangzhou Baiyun Technology CO.,LTD. is that the product will meet the Guangzhou Baiyun Technology CO.,LTD. sales specifications in effect at the time of shipment. Your
exclusive remedy for breach of such warranty is limited to refund
of purchasing price or replacement of any product shown to be other
than as warranted.
