Silane Modified Polyether Sealant Black White Gray 300ml/590ml Use
For Aluminum, Steel, Wood, Pvc, Pc, Pa
Product description
SMP industrial sealant is a neutral, elastic, one-component
sealant,
Has many applications, environmentally friendly, low VOC,
For most aluminum, steel, wood, PVC, PC, PA, no primer is required
After construction, the sealant cures with moisture in the
atmosphere to form a durable sealant.
Characteristics
Environmental friendly:
Paintable
Excellent workability
Outstanding adhesion
Excellent physical properties
Fields of applications
- Adhesion or sealing of body, structure, glass, decoration, air
conditioner, floor system of vehicles, such as train, bus, car.
- Adhesion or sealing of electrical equipments, such as mobile phone,
panel computer, digital camera, navigator.
- Fixation of electrical components.
- Joint sealing of container, elevator cage and ventilation device.
- Adhesion or sealing applications in electric, mechanical, shipping
fields.
- Any other suitable applications in industrial fields.
Technical characteristics
| Item | Value | Test method |
| Color | White, black, grey | |
| Curing system | Moisture cure | |
| Service temperature | -40~80℃ | |
Skin formation time (23℃, 50%RH) | 10~60min | GB/T 13477-2002 |
| Curing rate(23℃, 50%RH) | 3mm/24hr | |
| Specific gravity | 1.40~1.60 g/cm3 | GB/T 13477-2002 |
| Hardness(Shore A) | 20~60 | GB/T 531-2009 |
| Tensile strength | 1.0~3.5 MPa | GB/T 528-2009 |
| Elongation at break | 100~500% | GB/T 528-2009 |
| Shear strength | 1.0~3.0 MPa | GB/T 7124-2008 |
| Tear strength | 10~25 N/mm | GB/T 529-2008 |
| Volume resistivity | 1×1011~1013 Ω.cm-1 | GB/T 1692-2008 |
| Shelf life | 12 months | |
Standard
SMP Sealant for construction meets or exceeds the requirements of Q/BYHG 3-2014.
Product limitation
SMP Sealant for construction should not be used, applied or not
recommended :
- In conditions always above 80℃.
- In totally confined spaces as the sealant requires atmospheric
moisture for cure.
- In applications for immersion or always wet conditions.
- On substrates made of polypropylene(PP), polyethylene(PE) and polytetrafluoroethylene(PTFE).
Package
Available in 10.1 fl. oz. (300 ml) plastic caulking cartridges and
20 fl. oz. (590 ml) foil sausage packs.
Color
Available in white, black, gray or other colors on request.
Storage and shelf life
At least 12 months from date of manufacture when stored unopened in
a cool, dry place within the temperature below 27℃ and out of
direct sunlight.
Technical services
Complete technical data and adhesive/compatible tests are available
from Guangzhou Baiyun Chemical Industry CO., LTD.
Directions for use
Before embarking on any work involving SMP Sealant for industry,
the safety data sheet should be carefully studied by those carrying
out the work.
1. All surfaces must be structurally sound, clean, dry and free of
oil, grease, asphalt, and any loose particles.
2. Can extrude with skeleton gun or air drive gun .
3. Keep good ventilation during construction and cure.
4. To confirm optimal adhesion, adhesion testing should always be
carried out prior to the commencement of any project and be carried
out at regular intervals during the project.
Cautions
SMP Sealant for industry is non-hazardous when fully cured. Avoid
eye contact with uncured sealant, especially children. In case of
eye contact, flush eyes with water or obtain medical attention
immediately.
Guarantee
Guangzhou Baiyun Chemical Industry CO., LTD. has passed
ISO9001/ISO14001 /OHSAS18001 management system authentications, and
manufacture products strictly according to ISO9001 quality
management system requirements.
Repairs
Repairs should not be needed in ordinary situations. If sealant is
damaged and needs repairs, please remove damaged parts and clean
surfaces with isopropyl alcohol, then seal the damaged region with
this product. SMP sealant can firmly bond to cured SMP sealant.
Purchasing channels
Customers are recommended to purchase SMP Sealant for industry from
Guangzhou Baiyun Chemical Industry CO., LTD. or local distributors
we authorized.
Remark
The directives contained in this documentation are the result of
our experiments and of our experience and have been submitted in
good faith. Because of the diversity of the materials and
substrates and the great number of possible applications which are
out of our control, we can’t accept any responsibility for the
results obtained. In every case it is recommended to carry out
preliminary experiments.
